How can I find a small hole in my position?
1. Inflate the air cushion as much as possible to the most rigid, and then immediately close the valve.
2. Then double or triple the air cushion and press it with the weight of the body, such as squatting on it. (This will significantly increase the internal air pressure)
3. Wet the air cushion with water or a mild detergent solution (409 Cleaner is better because it will not cause soap residue). Small bubbles appear where there are small holes.
4. Determine the clerical position of the hole and use a ballpoint pen or pencil as a mark.
After determining the location of the hole, how do I repair the air cushion?
1. Use a mild detergent to clean the area around the hole. Thoroughly clean and dry.
2. Roll the air cushion to make it squat; close the valve. (Now the air cushion is passing through the hole to inward)
3. Use a little urethane (non-thermoset) tape to stick to the hole. Because the air cushion is shrinking, the tape is sucked by the hole to seal it.
4. If you can, let it dry for 24 hours to dry the tape.
5. Check your patch! The simple method is to roll up the air cushion and close the valve. Place the curled air cushion on a flat surface and place it for 24 hours (if it expands by itself during this time, it clearly shows you There are other damages.)
How do I repair a big hole or tear air?
1. First, clean and dry the surface around the damage
2. Patches in the THERM-A-REST patch tool
3. Or cut a waterproof nylon fabric and apply adhesive to the outside of the patch. Follow the label instructions for the adhesive.
How can I protect my air cushion from damage?
1. Do not let air cushions near sparks or flames
2. Do not place the hot pan on the air cushion. High temperatures can damage the fabric, foam and their bonding.
3. Don't put the packed air cushion in the car in hot weather. Overheating will cause the air cushion to burst.
4. Do not pressurize the air cushion with a high pressure air pump.
5. Do not contaminate the air cushion with chlorine or insecticide. These can damage the fabric coating.
6. Do not expose the air cushion to direct sunlight for a long time. Ultraviolet rays will gradually damage the fabric coating.
7. Keep your pet away from your air cushion. Dogs like to bite valves and cats like to grind their claws on these mats.
Does blowing into the air cushion affect use in cold or high altitude areas?
This is actually helpful. Add gas to the air cushion and you can increase the temperature. In the limit temperature, the inflation rate will be slightly reduced. Prolonged breathing inflation over several weeks may cause some humidity to increase.
How to store the air cushion when not in use?
When the air cushion is stored, it should be leveled and the valve should be opened until the inflation is completed. The valve is closed and the air cushion is rolled up to affect the speed of re-inflation. Long-term storage in the storage bag can cause mold.
How to clean the air cushion?
Soap, water, and soft brushes are best. After the air cushion has been cleaned, keep it inflated and let it dry before storage.
The above is a translation of the instructions for the Therm-a-Rest inflatable cushion. I think it is good but not necessarily suitable for all automatic inflatable cushions. Just ask my colleagues for reference! !
1. Inflate the air cushion as much as possible to the most rigid, and then immediately close the valve.
2. Then double or triple the air cushion and press it with the weight of the body, such as squatting on it. (This will significantly increase the internal air pressure)
3. Wet the air cushion with water or a mild detergent solution (409 Cleaner is better because it will not cause soap residue). Small bubbles appear where there are small holes.
4. Determine the clerical position of the hole and use a ballpoint pen or pencil as a mark.
After determining the location of the hole, how do I repair the air cushion?
1. Use a mild detergent to clean the area around the hole. Thoroughly clean and dry.
2. Roll the air cushion to make it squat; close the valve. (Now the air cushion is passing through the hole to inward)
3. Use a little urethane (non-thermoset) tape to stick to the hole. Because the air cushion is shrinking, the tape is sucked by the hole to seal it.
4. If you can, let it dry for 24 hours to dry the tape.
5. Check your patch! The simple method is to roll up the air cushion and close the valve. Place the curled air cushion on a flat surface and place it for 24 hours (if it expands by itself during this time, it clearly shows you There are other damages.)
How do I repair a big hole or tear air?
1. First, clean and dry the surface around the damage
2. Patches in the THERM-A-REST patch tool
3. Or cut a waterproof nylon fabric and apply adhesive to the outside of the patch. Follow the label instructions for the adhesive.
How can I protect my air cushion from damage?
1. Do not let air cushions near sparks or flames
2. Do not place the hot pan on the air cushion. High temperatures can damage the fabric, foam and their bonding.
3. Don't put the packed air cushion in the car in hot weather. Overheating will cause the air cushion to burst.
4. Do not pressurize the air cushion with a high pressure air pump.
5. Do not contaminate the air cushion with chlorine or insecticide. These can damage the fabric coating.
6. Do not expose the air cushion to direct sunlight for a long time. Ultraviolet rays will gradually damage the fabric coating.
7. Keep your pet away from your air cushion. Dogs like to bite valves and cats like to grind their claws on these mats.
Does blowing into the air cushion affect use in cold or high altitude areas?
This is actually helpful. Add gas to the air cushion and you can increase the temperature. In the limit temperature, the inflation rate will be slightly reduced. Prolonged breathing inflation over several weeks may cause some humidity to increase.
How to store the air cushion when not in use?
When the air cushion is stored, it should be leveled and the valve should be opened until the inflation is completed. The valve is closed and the air cushion is rolled up to affect the speed of re-inflation. Long-term storage in the storage bag can cause mold.
How to clean the air cushion?
Soap, water, and soft brushes are best. After the air cushion has been cleaned, keep it inflated and let it dry before storage.
The above is a translation of the instructions for the Therm-a-Rest inflatable cushion. I think it is good but not necessarily suitable for all automatic inflatable cushions. Just ask my colleagues for reference! !
- Fit in Any Decor Style: Soft material, simple contemporary design and classic color fit in any kind of decor theme.
- Comfortable: The sofa sets with a comfortable cushioned back and firm padding. Such a couch sofa will give you a more relaxed time and happy family time.
- Solid and Durable: Sturdy design of the sectional sofa supported with high quality eucalyptus materials, supportive memory foam of the couch sofa and pillowed back cushions provide superior stability and comfort. Weight capacity up to 500 lbs.
- Easy to Assemble: Just slide all the pieces together, only take about 15 minutes.
Sectional Sofa,Sofa Set Furniture,Sofas Sectionals & Loveseats,Living Room Loveseat
Kaifeng Lanwei Smart Home Co., Ltd , https://www.sofa-recliner.com