[ Chinese wardrobe net ] Speaking of the wardrobe sliding door, everyone should not be unfamiliar. People who have undergone home renovation may try to use the products of sliding doors. Such as: wardrobe sliding doors, restaurants, partitions between the living room and so on. The sliding door has become a beautiful scenery in our living room, bringing a new way of life, simple push-pull action, and releasing more living space for life. Problems will also arise during the purchase and use of sliding doors. Therefore, it is very important to understand some common sense of sliding doors.
The main points are as follows:
1. Pulley: Pulley is an important part of sliding door. It is necessary to pay attention to the selection of high quality bearing pulley. The outside of the pulley is made of fiberglass material, which has the characteristics of high strength, wear resistance and bottom noise. It is used for more than 100,000 times of push-pull, and the wheel body is treated with three-degree polishing and plating, never rusting.
2, profiles: sliding doors Practical profiles are generally two kinds: one is aluminum alloy, one is plastic steel. Due to its light weight and high strength, aluminum alloy is a high-grade material for sliding door substrates. It has gradually replaced plastic steel products, and aluminum-magnesium alloys are divided into ordinary aluminum-magnesium alloys and smaller aluminum-magnesium alloys for special aviation. Because aluminum aluminum titanium magnesium silicon alloy has higher strength and smaller weight. Therefore, it is favored by consumers, but the cost is several times that of ordinary aluminum-magnesium alloy. When looking at the profile, not only the substrate should be paid attention to, but also the surface treatment should be observed. The advanced surface treatment can resist oxidation, electrophoresis, peritoneal carbon coating, etc. Process. These processes have higher hardness and aesthetics than simple spraying and plating.
3, track: When choosing the sliding door, try to choose the same track as the material of the door, because the track is an important part, to withstand repeated friction. Therefore, the track must have high strength and resistance to friction.
4, rubber strip: the main materials popular in the market are PVC rubber, silica gel and so on. The silica gel strip is made of non-toxic, non-corrosive silicone material and can maintain good toughness under ultra-low temperature conditions, ensuring the flexible connection of the profile of the sheet.
5, glue, edge banding, veneer: edge banding mainly seals the section of the board to avoid damage to the board due to environmental or unfavorable factors in use, and also achieves decorative effect. Ordinary glue will be pungent due to formaldehyde. The smell. And there is also the danger of carcinogenesis. Therefore, when purchasing, mainly whether there is smell.
6. Plate, substrate: The commonly used substrates in cabinet plates are blockboard, MDF, moisture-proof particleboard, among which the most cost-effective is moisture-proof particleboard, which has the advantages of light weight, high strength and strong nail holding power. But moisture-proof particleboard also has different qualities.
The monofilament artificial grass has a surcharge. The sand takes much longer to go into the fibers for an optimal playing surface. It is less susceptible to hardening, if not properly maintained on outdoor installations.
Our company is a professional artificial
turf manufacturer, specialized in research, production, sales, design
and installation. Our main products are all kinds of artificial grass,
used in different kinds of sports fields and landscaping, such as
football fields, tennis courts, gate ball fields and golf putting
greens.
Monofilament Yarn,Mono Yarn,Nylon Monofilament Yarn,Polyester Monofilament Yarn
JIANGSU WMGRASS CO., LTD. , https://www.wmgrasslawns.com