In order to pursue the comfort of the bath, the top spray of the shower is now quite large, and the larger it is, the more water there is after closing the tap. After use, the pressure inside the shower is in equilibrium with the atmospheric pressure, so the water inside will not flow out for a while, and it will flow out after a period of time when the balance of water is lost. This is a problem with large top showers. It's not that showers are leaking or broken, so you can rest assured that you have encountered this problem. If it is continuous non-stop leaking water, it is a quality problem. What happens if the shower leaks?
First, the shower head to the ball leakage
First, unscrew the shower head from the steering ball ring, find the inner O-ring or a similar seal and replace it, then turn the shower head back to its original position.
Second, shower head handle joint leakage
Select the appropriate shower hose and faucet according to the specifications, replace its rubber ring, and reinstall it.
Third, grit or sediment leakage caused
Unscrew the shower head and clean it. If necessary, soak the parts with vinegar and scrub the parts. Be careful not to scratch it. If the showerhead is adjustable spray, check all movable parts carefully for signs of excessive wear. If the rotating handle does not move smoothly or if the internal cam breaks, the entire shower head must be replaced.
Fourth, the shower head fine water becomes thick and thin
Bath showers take a long time, the water will become smaller, because the water quality is not good, the water contains more alkali, scale deposits in the outlet hole, leading to the shower plug. The solution is also very simple. For showers designed with silicone particles, gently knead it. If scale is severe, use a plastic pouch to hold the white vinegar, and wrap the shower soaked in water for a period of time. Rinse with water.
<\p><\div>
Henan WonkingChina I/E Co., Ltd. , https://www.wshousewares.com