[ Chinese wardrobe network ] Many people like to put the room in a beautiful atmosphere, then first of all, have a beautiful and tall wardrobe closet. Then, some Gao Fushuai and Bai Fumei will pick up the decorator or spend money to buy a cabinet. However, there are still a large number of people who still want to install a cabinet according to their own preferences. This is not only what they like, but also saves a part of the money, and also eliminates the trouble of transporting a huge wardrobe. The installation method of these cabinets is still a bit complicated, then the small series will explain to the small partners the installation method of the common four-door wardrobe.
Choose the right four-door wardrobe
When choosing a wardrobe, we should think more about it and take care of it. First of all, we have to make sure that it is placed in the room or in the living room. If it is to be placed in the room, we can choose the size of the four-door wardrobe according to the size of the room and the height of the room. Then, the color of the cabinet can be selected according to the color of the painting in the room. If the room is bright and the color of the paint is bright, it is malicious to choose a wardrobe with a relatively darker color. If the room is painted in a darker color, then the room will look dark, so we can choose a brightly colored wardrobe, which will make the room light a little brighter.
Steps for installing a four-door wardrobe
After we have selected the four-door wardrobe that suits us, we can start the installation. However, the four-door wardrobe is divided into a door sliding track and a spring hinge. The two installation methods are different.
Spring hinge door wardrobe installation steps
1. Prepare the installation tool, Phillips screwdriver, newspaper or carton, etc.
2. Inventory the classification of each board. If you have separate drawers and pants racks, you can assemble them first and put them aside.
3. First find out the four base combination plates and base plate, screw in the black screw link, tighten the screws, and fix the floor and base together. Screw the prepared black screws and metal screws into the screw holes of the base, and screw the middle side plate and the back plate into the corresponding positions at the same time.
4. Put the side panel of the cabinet in the middle, then place the back panel on the ground, then screw the two boards together and tighten them. At the same time, put the other partitions in other wardrobes, and pay attention to the direction of the partitions and the grid. The cabinet is almost installed. Then connect the base to the cabinet with screws, tighten the screws, and install the drawers.
5. Install the folding spring on the door on the door and screw the door to the cabinet. Move the cabinet to the right place. The cabinet installation is complete.
Sliding rail door wardrobe installation steps
The sliding rail door wardrobe installation steps are almost the same as the first few steps of the spring hinge, the difference between the last and the last. After installing the cabinet, fix the upper and lower slide rails on the base and the top. Then put the door into the track like an window. This type of wardrobe installation will be a bit more difficult, but it actually looks bigger and bigger in life, and it is convenient to use.
As the saying goes, I am doing a good job, so I don't think that the wardrobe that I installed myself is not bought outside. When you work hard to install a cabinet that you like, you will feel a sense of accomplishment and will like it more.
Cigar Ashtray,Luxury Cigar Ashtray,Cigarette Ashtray,Metal Ashtray
Wenzhou Xinyu Imp & Exp Co.,Ltd , https://www.somgar.com