How to install a barcode printer?
1. Unpacking and checking the product Do not confirm the following items before unpacking
1. This printer is specially used for recycling environmentally friendly recycling cartons. When you look at the shipping cartons and find any defects, please report directly to the carrier.
2. The included printer is facing up
3. Remove the filler first and then carefully remove the printer.
4. Place the printer on a flat, sturdy surface and check for any damage caused by shipping.
5. Be aware of anything that can cause damage
6. Check whether the object is complete according to the packing list. 2. Hardware installation
1. Please refer to the operation manual to install the ribbon.
2. Please refer to the operation manual to install the paper roll.
3. Please refer to the operation manual to connect the power cord and data transmission line. 3. Software installation
1. Insert the CD-ROM, refer to the driver installation, install the driver
2. Install the label editing software you have chosen. Please note that you are sure to support this printer when installing the label editing software.
3. Printer panel settings please refer to the document panel operation
4. Please refer to the manual of the software for the software of the PC. After the installation is completed, you can use this printer after booting. 4. Before installing and installing the WINDOWS driver, pay attention to the following items.
1. Check the contents of the driver
2. Back up this driver
3. Read the README.TXT documentation for this driver (eg windowsdriver/dr200readme.txt on the CD)
4. Enter WINDOWS
5. Insert the CD. If the CD runs automatically, please exit the autorun interface.
6. In the system is WIN95/98/NT4.0/2000, the installation steps:
7. Click Start;
8. Select Settings, then Printers"
9. Double-click the new printer, a dialog box appears, click the Next button
10. Select a network printer or local printer and click the Next button
11. Select Install from disk and enter the full path to the driver file, such as f:windowsdriverdr200win2000
5. Important safety and other considerations
1. Please read this safety instruction and precautions carefully.
2. This printer passes the FCC, part 15 class A. When used, it will interfere with radio, TV and other communication products, so please remove these products to avoid being scratched.
3. Place the printer on a level, sturdy table or flat surface
4. Keep away from wet, watery, hot places
5. Please refer to the specification label on the rear panel of the printer to make sure that the power supply specifications you are using are correct. Users should not pay attention to ensure that the power supply voltage switch (110V/230V) matches the power supply voltage in your area. Causes the machine to burn out or not function properly.
6. Do not open the case when the machine is plugged in.
7. Non-professionals are prohibited from disassembling the printer
8. Do not cut off the power of the printer before cleaning the printer. Do not use liquid or spray cleaner to clean the printer. Wipe the printer gently with a soft cloth or cotton.
9. Do not use the printer at room temperature above 40 degrees Celsius, otherwise it will damage the printer.
10. The heat dissipation holes around the printer should be blocked and affect heat dissipation.
11. The power cord of the printer should be placed in a suitable and safe place. The voltage and current that the power cord identifier can carry should be greater than the voltage and current identified by the printer.
12. Never allow any liquid to drip into the vents of the printer to avoid fire or short circuit.
13. If the printer is not used frequently, disconnect the printer from the host and the power cord to avoid damage to the printer due to transient overload voltage.
1. Unpacking and checking the product Do not confirm the following items before unpacking
1. This printer is specially used for recycling environmentally friendly recycling cartons. When you look at the shipping cartons and find any defects, please report directly to the carrier.
2. The included printer is facing up
3. Remove the filler first and then carefully remove the printer.
4. Place the printer on a flat, sturdy surface and check for any damage caused by shipping.
5. Be aware of anything that can cause damage
6. Check whether the object is complete according to the packing list. 2. Hardware installation
1. Please refer to the operation manual to install the ribbon.
2. Please refer to the operation manual to install the paper roll.
3. Please refer to the operation manual to connect the power cord and data transmission line. 3. Software installation
1. Insert the CD-ROM, refer to the driver installation, install the driver
2. Install the label editing software you have chosen. Please note that you are sure to support this printer when installing the label editing software.
3. Printer panel settings please refer to the document panel operation
4. Please refer to the manual of the software for the software of the PC. After the installation is completed, you can use this printer after booting. 4. Before installing and installing the WINDOWS driver, pay attention to the following items.
1. Check the contents of the driver
2. Back up this driver
3. Read the README.TXT documentation for this driver (eg windowsdriver/dr200readme.txt on the CD)
4. Enter WINDOWS
5. Insert the CD. If the CD runs automatically, please exit the autorun interface.
6. In the system is WIN95/98/NT4.0/2000, the installation steps:
7. Click Start;
8. Select Settings, then Printers"
9. Double-click the new printer, a dialog box appears, click the Next button
10. Select a network printer or local printer and click the Next button
11. Select Install from disk and enter the full path to the driver file, such as f:windowsdriverdr200win2000
5. Important safety and other considerations
1. Please read this safety instruction and precautions carefully.
2. This printer passes the FCC, part 15 class A. When used, it will interfere with radio, TV and other communication products, so please remove these products to avoid being scratched.
3. Place the printer on a level, sturdy table or flat surface
4. Keep away from wet, watery, hot places
5. Please refer to the specification label on the rear panel of the printer to make sure that the power supply specifications you are using are correct. Users should not pay attention to ensure that the power supply voltage switch (110V/230V) matches the power supply voltage in your area. Causes the machine to burn out or not function properly.
6. Do not open the case when the machine is plugged in.
7. Non-professionals are prohibited from disassembling the printer
8. Do not cut off the power of the printer before cleaning the printer. Do not use liquid or spray cleaner to clean the printer. Wipe the printer gently with a soft cloth or cotton.
9. Do not use the printer at room temperature above 40 degrees Celsius, otherwise it will damage the printer.
10. The heat dissipation holes around the printer should be blocked and affect heat dissipation.
11. The power cord of the printer should be placed in a suitable and safe place. The voltage and current that the power cord identifier can carry should be greater than the voltage and current identified by the printer.
12. Never allow any liquid to drip into the vents of the printer to avoid fire or short circuit.
13. If the printer is not used frequently, disconnect the printer from the host and the power cord to avoid damage to the printer due to transient overload voltage.
Hand & Foot Care,Hand And Foot Care,Hand Care,Foot Care
Guangzhou Jie Lin international trade Co., LTD , https://www.jinlintrade.com