[ Chinese wardrobe net ] When the family chooses to buy a wardrobe , they will consider many factors, such as quality, price, size, etc., but the wardrobe will open the door and close the door to make a sound, which will affect the normal living habits. Today, China Wardrobe Network explains the correct installation method of the wardrobe sliding door track for everyone, and together to crack the reason why the wardrobe sliding door is loud.
[Wood lock noise reason]
1. The hanging rail is too thin, use thicker hanging rails, or put hardwood on the two sides of the hanging rail;
2. The hanging rail is not smooth, uneven, and has burrs. The smooth and flat hanging rail is used.
3. The fixing screws are not tightened, tighten the screws, or replace the longer screws;
4. The fixing screws have a large spacing and the fixing screws are added;
5. There is a gap between the hanging rail and the door frame, so that the hanging rail is close to the door frame;
6, the hanging wheel bearing itself is of poor quality, replacement hanging;
7. The outer layer of the hanging wheel is not round, with dents, burrs or film lines, and the hanging wheel is replaced.
[How to install the wardrobe sliding door track correctly]
1. Before installing the track, pay attention to the "Fangzi" (because the track is fixed on the "Fangzi"), and then the "Fangzi" is connected to the lintel in the house structure to be fixed). Generally, the size of the "square" is between 5*5 and 8*8 square centimeters, which is firmly connected to the lintel. The "square" is connected to the track and requires horizontal level.
2. The guiding device requires a certain gap with the lower surface of the door to prevent the door from being deformed and friction with the guiding device, which affects the sliding effect.
3. Among the three screws with the bayonet limit, the first two screws can be used to adjust the tightness of the bayonet. The third screw is used to determine the fixed position of the bayonet limit.
4. If the red detachable hanging plate is encountered during installation, pay attention to the installation method. One of the screws in the hanging wheel fitting cooperates with the bolt to suspend and fix the plate. The other nut should be installed in the black carrier of the hanging wheel to connect the hanging wheel and bolt.
Hand And Foot Care,Hand Care,Foot Care,Skin Care
Guangzhou Jie Lin international trade Co., LTD , https://www.jinlintrade.com