[ Chinese wardrobe net ] The whole wardrobe can be tailor-made, rational use of space, design more humane, and environmentally friendly, stylish and professional. However, the core material used as the whole wardrobe is the most important part of the overall wardrobe structure and the most used part. How to judge the overall wardrobe board?
How to judge the overall wardrobe plate
Different grades, plates are also different
How to judge the panel of the custom closet, generally look at the cut surface of the sample. From the cut surface, the blockboard is a two-layer or four-layer veneer (also thickened using four or more veneers) close to the solid wood core. The quality of the blockboard has a flat cut surface with no gaps; the MDF is made of fine fibers, and the combination is relatively tight and the weight is relatively large; the particle board is a wooden granular structure, but the combination is not tight enough and the weight is light. The poor quality can even be seen with small pores; the multi-layer board is made of a plurality of veneers, usually three or five layers.
How to judge the overall wardrobe plate
Look for environmentally friendly plates
Professional custom wardrobe manufacturers use environmentally friendly panels that meet national testing standards, while some manufacturers use inferior panels that have no test reports and pose a potential threat to human health. Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department.
How to judge the overall wardrobe plate
Plate veneer to see the quality
Some wardrobes look good on the surface, however, with a light stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional custom closet manufacturers generally use environmentally friendly melamine veneer with thick thickness and high temperature and high pressure treatment, high surface strength, abrasion resistance and scratch resistance.
How to judge the overall wardrobe plate
Sheet edge sealing to see work
Professional custom-made wardrobe manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and only cut one side of the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.
Skin Care Machine,Reduce Wrinkles Machine,Remove Wrinkles Machine,Micro Needle Roller For Face
Guangzhou serika Technology Co., Ltd. , https://www.serikamedical.com