Which kind of good material is introduced

[ Chinese wardrobe net ] Wardrobe is an indispensable piece of furniture for every family. Not only CCTV, but also wall cabinets, you can also buy a whole wardrobe . Moreover, there are many differences in materials and styles, but because of the relatively large size of the wardrobe, it is difficult to move and secondary construction. It is recommended to pay more attention to the choice of materials when purchasing the wardrobe, not only to extend the use time, but also to be more environmentally friendly, to prevent the inferior materials from emitting bad gases. Here are some of the plates that are suitable for making wardrobes.

MDF

Which kind of board is best for making a wardrobe? Is it a MDF? It is also called a fiberboard. It is a man-made board made of wood fiber or other plant fiber and coated with urea-formaldehyde resin or other suitable adhesive. According to their density, they are divided into high density board, medium density board and low density board. Due to its soft and impact resistance, MDF is also easy to reprocess. However, since the national standards for high-density boards are several times lower than international standards, the quality of MDF used in China needs to be improved.

Plywood

It is commonly known as the thin core board, which is made of three or more layers of 1mm thick veneer or thin-plate adhesive. It is the most commonly used material in hand-made furniture. The splint is generally divided into three specifications (1 centimeter 1 mm) of 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT.

Decorative panel

The panel is a decorative sheet with a single-sided decorative effect, which is made by cutting the solid wood board into a thin veneer with a thickness of about 0.2 mm and using a splint as a base material. It is a special way of splinting and has a thickness of 3mm. Decorative panels are a high-end finishing material that is currently different from blending practices. The board is the main component of the wardrobe, and its quality directly determines the quality of the product. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. Wood-based panels are further divided into splints, particle boards, and fiberboard. Among them, fiberboard has high density, medium density and low density.

Large core board

Called the blockboard. It is made up of two sheets of veneers bonded together in the middle. The price of the large core board is cheaper than that of the thin core board, and the vertical direction (differentiated by the core material direction) is inferior in bending strength, but the lateral bending strength is high.

Wood shavings

Particleboard is actually what we call a particle board. It is a piece of wood that is cut into a certain size and size. After a series of drying, adhesive treatment, hardener treatment, water repellent establishment, etc., it is pressed at a certain temperature. A kind of plate, which is more environmentally friendly, and the amount of glue used in the production process is quite small. Now most of the panel wardrobe products on the market use such materials, so do the wardrobe. The best kind of board? It is good to use particleboard board!

The treated plates are more or less defective in quality, because after the secondary treatment, a lot of synthetic techniques are used. If the moisture or rot will lead to peeling or loosening, the solid wood board is the best choice. Not only is the quality very good, it can be used for a long time, and because it is a natural raw material, there is no release of polluting gas, but the price of solid wood board is relatively high, and the production cost is also improved. It is recommended to choose according to your actual needs.

Bamboo Bottle

Bamboo Bottle,Bamboo Sports Bottle,Bamboo Andle Lid Vacuum Bottle,Bamboo Vacuum Bottle

Ningbo Auland International Co.,Ltd. , https://www.ecocolabottle.com

Posted on