Guide: The placement of bar code labels on common packaging. The preferred location of the product is in the lower right half of the back of the product package.
The placement of the bar code label on the common package, the preferred location of the product is in the lower right half of the back of the product package. Except for irregularly packaged goods, serials and partially transparent plastic packaging. Generally, the placement of bar code symbols on our common type packaging is:
Box type packaging
For box packaging, the bar code symbol should be printed on the lower right half of the back of the package, near the edge. The bar code symbol is not suitable for printing on the lower right half of the front side.
2. Bottle type and pot type packaging
The bar code symbol should be printed on the back of the package or in the lower right half of the front side. Bar code symbols should not be placed at the neck or neck.
3. Can and tube packaging
The bar code symbol should be placed on the back of the package or in the lower right half of the front side. Bar code symbols should not be placed where there are undulations, joints and ridges.
4. Barrel and basin packaging
The bar code symbol should be placed on the back of the package or in the lower right half of the front side. When the back, front and side are not suitable for placement, the bar code symbol can be placed on the lid of the package, but the depth (H) of the lid should not be greater than 12 mm.
5. Bag type packaging
The bar code symbol should be placed on the back of the package or in the lower right half of the front side, as close as possible to the middle of the bag, or placed in the flat, not wrinkled area after filling the contents. Bar code symbols should not be placed under the border or under the hem.
6. Shrink film and vacuum forming packaging
Bar code symbols should be placed on a flat surface. Bar code symbols should not be placed where wrinkles and distortions occur.
7. Blister packaging
The bar code symbol should be placed in the lower right half of the back of the package, near the edge. When the back side is not suitable for placement, the bar code symbol can be placed on the front side of the package, and the bar code symbol should leave the protruding portion of the bubble cover. When the height of the protruding portion of the bubble cover exceeds 12 mm, the bar code symbol should be away from the bubble projection.
8. Card packaging
The bar code symbol should be placed in the lower right half of the back of the package, near the edge. When the back side is not suitable for placement, the bar code symbol can be placed on the front of the package, and the bar code symbol should be placed away from the product to prevent the bar code symbol from being blocked.
9. Disc packaging
The bar code label should be placed in the lower right half of the top side of the package, near the edge.
10. Egg box packaging
The bar code label should be placed on the side of the lid with the connection side of the box body, and the connection side is in the area on the right side of the box cover. If it is not appropriate to place it here, the bar code symbol can be placed in the lower right half of the top side.
11. Multiple combinations
The bar code label should be placed in the lower right half of the back of the package, near the edge. When the back side is not suitable for placement, place the bar code symbol on the right lower half of the side of the package, near the edge. When the multi-piece package and its internal one-piece package have a product barcode, the bar code symbol on the internal single-piece package should be completely covered, and the bar code symbol on the multi-package package should be the only visible barcode when scanning. .
12. Large or bulky packaging
1. Package Features: There are two directions (width/height, width/depth or height/depth) when the length is greater than 45cn, or the weight is more than 13kg.
2. Symbol position: The bar code symbol should be placed in the lower half of the right side of the package. When the back of the package is not suitable for placement, it can be placed on other sides of the package except the bottom.
3. The first possible symbol placement method:
a. Place bar code symbols on both sides: For bulky or bulky bag type goods, two identical bar code symbols for the item can be used for each item, one placed on the lower right part of the back of the package; the other is placed In the upper right part of the front of the package.
b. Enlarge the identification characters for people: For large or bulky goods, the height of the human identification characters of the commodity bar code symbol can be enlarged to more than 16mm and printed near the bar code symbol.
c. Double bar code symbol label: For bulky or bulky bag type goods, double bar code symbol labels can be used. The label can be divided into three parts: A, B, and C. The bar code symbols on the A and B parts of the label are identical, and are the bar code symbols that identify the product. The A and C parts of the label should be firmly attached to the product packaging, and the part B should not be attached to the product packaging. When scanning the settlement, the B part of the label is torn off, and the store salesperson scans the barcode on the part for settlement, and then destroys the part. Part A of the label is kept on the package for inspection. When the package to which the double bar code symbol is pasted is not used as the outer package of the merchandise transportation process, the C portion (auxiliary sticker) of the double bar code symbol label can be omitted.
13. Irregular packaging
Bar code labels should be preferred for regular, bar code symbol position fixed packaging methods. If it is necessary to use irregular packaging with unfixed bar code symbols, the bar code symbol should be printed on the packaging material at a sufficient repetition rate so that a complete bar code symbol can be printed on one side of the package. The distance between the repeatedly printed bar code symbols should be no more than 150mm to avoid repeated reading. It is also possible to lengthen the strip of bar code symbols on the packaging material to ensure that a sufficiently high bar code symbol appears on one side of the package.
14. Publications
The placement of bar code labels on publications depends on the type of publication.
The preferred location for the bar code label on the book is in the lower right corner of the back cover of the book. For non-paper hardcover books, the bar code symbol should be printed on the upper right corner of the book's cover or other prominent position of the book.
For serial publications (such as newspapers, magazines), the preferred location for the bar code label is in the lower left corner of the cover.
For audiovisual e-commerce publications, bar code labels should be printed on the back of the outer packaging for easy reading.
For publications that require additional barcode labels, the additional barcode symbol should be placed on the right side of the main code barcode label; the direction of the additional barcode label strip is parallel to the direction of the main code barcode symbol strip; the lower end of the additional barcode symbol strip and the main code barcode symbol The start, middle, and end of the terminator are flush.
15. Transparent plastic packaging
For transparent plastic packaging of clothing, textiles, culture and education, the preferred location for bar code labels is the upper right corner of the front of the package. The direction of bar code labels and other product identification information should be consistent with the graphic or description data on the plastic packaging.
For unpackaged items, the product barcode label can be printed on the tag. If the item has a flat surface and is pasted or labeled, the bar code symbol can be printed on the label.
Features: It's high quality and high pigment cream blush. It's vegan and cruelty free. We don't do animal test when make products.
Usage: Dip a little blush with your fingers or sponge egg, then apply it on your cheeck. It can be used for daily makeup to make you look refreshed.
Advantages: Our company is a comprehensive cosmetics enterprise integrating research,development production, sales and service, which is a professional manufacturer of cosmetics. We provide custom service. We can customize your colors and logo. Making high quality products is our aim.
Delivery: It would take around 15-20 days to finish the custom products after we confirm the order.
It would take around 7-10 days to finish the products which don't need to be customed.
Payment: We can accept the payment through T/T ($25 extra for each payment).
custoom blush,liquid blush,makeup blush,hot selling blush
Suzhou Yimeijia368 Biological Technology Co.,Ltd. , https://www.yimeijiabeauty.com