[China] net wardrobe a lot of people new to home improvement knowledge certainly do not know for custom closet, custom closet, but very important, and this link must not be careless. So what should I do with a custom closet? Is there any way? Let's take a detailed look at the detailed analysis of the style of custom wardrobe products.
Customized wardrobe product style analysis
Introduction
Anyone who knows about custom wardrobes knows that wardrobes still have "standard" and "non-standard" points. However, many consumers do not understand that since it is a custom closet, of course, it must be done in full accordance with the requirements of customers. Why should it be divided into "standard customization" and "non-standard customization"?
Sheet specification
First of all, look at the panels made of wardrobes. In the custom wardrobe industry, 1220*2440mm gauge plates are commonly used, and the width of the panels is limited. How to open the material to maximize the utilization of the board, reduce the production cost of the product, and finally make the wardrobe not too high.
Analyze how the manufacturer improves the utilization rate of the plates. The cabinets have standards of 300mm, 400mm, 500mm and 550mm. 20mm in the 1220mm board is 2cm. Because the board will be bumped during the transportation process, the corners of the board will collapse. Therefore, the 2cm furniture manufacturer will cut 1cm from side to side for the trimming. Therefore, the remaining 1200mm plate can be sawed 4 pieces of 300mm, 3 pieces of 400mm, 2 pieces of 500mm, and what is the remaining 20mm? Saw into 2 pieces of 10mm to make the sliding door track pad or baseboard. Two pieces of 550mm, the remaining 10mm is still used as a sliding door track pad or baseboard. Finally, take a 1200mm board saw and two 600mm to make the outer side of the closet.
The above method of cutting is the most material and also the best factory process management. There is no pile of material left in the factory floor.
Standardized scale factory
For the custom-made wardrobes "non-standard" and "standard", this is a problem with the production of large-scale, standardized brands. For some small workshop-style wardrobe manufacturers, there are not many stores in the country, or even one or two local stores. There aren't many orders in a month, and the production workshop does not have a standardized line like the scale of brand manufacturers. It is quite good to be able to receive a few orders, and he is still doing 600mm or 700mm.
In a brand manufacturer, there are four or five hundred stores in the country and even more. The national orders are concentrated in a production line with a standardized production line. There are many raw material plates in the workshop, and the semi-finished products in the previous assembly line. If the saw plate is not the standard 600mm, but 700mm, the production workshop needs to stop and adjust many machines on the assembly line before production.
On the other hand, the 1200mm board saw an 800mm, leaving 400mm. This 400mm can't be used for a while, it has to be piled aside, which puts a lot of pressure on the management of the production workshop. When can this board be used? What is the width? Can it be used? A lot of things are piled up, bringing unreasonable use of resources to a limited production floor. This is not like a small custom-made brand. When you need a wide plate, if the remaining materials have the same color and the same material, there is no stacking pressure in the workshop. If you need it, you can use a ruler to measure the width of the board. This is why there is a “non-standard†problem for large brands with standardized production lines.
Customized wardrobe product style analysis
Common four designs
Concave space??Into the wall wardrobe
The wall-mounted wardrobe greatly enhances the use of space, not only can effectively expand the living space, but also fashionable, beautiful and practical, and better harmonious and unified with the overall environment, beautiful and practical.
Various spaces??
The wardrobe is extended to the top, and the wardrobe is tailored from the bedroom space, so that the usage rate per millimeter is 100%. At the same time, the wardrobe door is used, which is more suitable for space physics.
Beam and column space?? Baoliang Baozhu wardrobe
The custom closet can fit the beam and column of the bedroom very well. Through this wardrobe rendering , the part of the beam and the column that is wrapped can be perfectly decorated and decorated with beautiful appearance and increased storage.
Irregular space?? Corner wardrobe
The reasonable matching of the corner wardrobe will make full use of the original "dead corner", and also reduce the trouble of cleaning up the "dead corner" in the home, making the space arrangement compact and orderly, and at the same time beautiful!
Finally, Xiao Bian suggests that it is best to participate in the renovation, in order to better find the problem to solve the problem. The above is the content of the detailed analysis of the custom wardrobe product style explained by Xiaobian. I believe that everyone has more or less understanding, I hope this article can help you. You can also log in to the website to view and subscribe to more related content and information.
Dumplings Production Equipment
Helper Food Machinery has more than 30 years of experience in the development and production of pasta processing equipment. According to the requirements of different capacity and dumpling shapes, various types of dumpling forming machines have been designed and produced. The main models include steaming dumpling equipment, quick-freezing dumpling machine, Russian dumpling machine, fried dumpling equipment and other complete dumpling production equipment series.
The dumpling machine integrates the rolling system, filling system, molding system, packaging system, and wrapper collecting system. It has the features of automation, low failure rate, high speed and high yield. The proportion of the dough wrapper and stuffing is adjustable and the dumpling shapes are exquisite.
Dumpling Making Machines,Dumpling Forming Machine,Dumpling Production Line,Frozen Dumpling Line,Fried Dumpling Line,Steamed Dumpling Line
Helper Machinery Group Co., Ltd. , https://www.helperfoodsolution.com