Cardboard Adhesion Analyzer Maintenance Considerations

Dongguan Haida Instrument 400-071-1808/0769-89280808

The paperboard adhesion tester is used to test the compressive strength in the upright direction of paper, corrugated paper, and kraft paper, and shows the compressive strength through the LCD screen. With a variety of negative parts, can test cardboard, paper pressure, ring pressure, straight pipe compression, flat pressure and bonding strength. When the instrument is not in use, appropriate protective measures should be taken. If it is not used for a long time, it should be re-tested before use;

Cardboard Adhesion Analyzer Maintenance Note:

1. The working environment and conditions of the instrument should fully comply with regulatory requirements, including room temperature, relative temperature, power supply voltage, and the installation basis. In addition, some instruments have special requirements for the environment, and should be maintained and maintained in strict accordance with the operating instructions.

2 , should be kept clean and avoid collision before and after use;

3 , when you do not use the test equipment for a long time, you should plug in the electricity regularly;

4 , the instrument should be responsible for the special person, the test should be carried out in strict accordance with the operating procedures, is strictly prohibited beyond the scope of the test test, the test should be completed after the instrument to restore the initial position to ensure that the next normal test;

5. The instrument should be cleaned and tested regularly. The instrument to be calibrated should be calibrated to ensure the accuracy of the instrument.

6. When the instrument is not in use, appropriate protective measures should be taken. If it is not used for a long time, it should be re-inspected before use;