After the carving of the wood carving works, it is polished and polished, and finally the enamel paint is applied. After the last two processes, it is brilliant, dazzling, anti-mite, and durable.
Traditional wood carvings use plant paint. The plant paint is divided into two kinds, which are directly taken from the liquid branch of the lacquer tree, and the raw lacquer is artificially treated to become a mature lacquer. Add the raw lacquer to the appropriate amount of tung oil, stir in the sunlight for three or four days, make the paint and oil fully blended, become soft and shiny, not easy to dry, so as to use its sticky gold foil.
In general, the wood carving paint is often transferred to a red color, and the red background is used to set off the gold surface, which is more star-studded and radiant. After the paint is painted, it is put into the wet and dry, the wet room must maintain a certain temperature and humidity, and the water is often splashed when the weather is dry, so that it is stable at about 20 degrees Celsius, in order to achieve the natural dry effect of the paint. The operating procedures for enamel paint and gold paste are as follows:
Filler: Stir the cracks and defects in the woodcarving work with the raw powder, stir the gypsum powder or the fine powder ground from the brick tile. After drying, polish and trim.
Head coating: Infiltrated into the soil with a raw lacquer, it is magenta, and evenly coated on the surface of the wood carving work with the brush, the role is to let the wood carving absorb the paint liquid and make the pores heal.
Second coating: Take half of the raw lacquer, transfer into the soil red and a small amount of "cinnabar", which is dark red, and evenly spread with a brush. The effect is to make the surface of the wood carving smooth, so as to improve the gold effect.
Three coats: The mature paint is transferred into the cinnabar and is red. It is applied to the wood carvings very evenly with the cow brush. After entering the wet room, if it is slightly sticky when taken out the next day, it can be gold.
Gold: Gold foil is made of pure gold by artificial tapping. It is as thin as a flap. When it is gold, it should avoid the wind. With a brush made of hair, the gold foil is lightly attached to the wood carving, and the paste is required to be full. Gap, and finally the gold powder is blown clean, in order to achieve a brilliant effect like gold casting.
Toothpaste
Charcoal Toothpaste,Fluoride Toothpaste,Fresh Herbal Toothpaste,Whitening Toothpaste
Ultradent Oral Care Co., Ltd. ,