[ Chinese wardrobe network ] Why do many people value the wardrobe panels? Because the quality of the wardrobe plate directly affects our health! Today, Xiaobian will come to see you what the plates are made in the wardrobe! Which is more suitable for us?
Several types of panels used for making wardrobes: particleboard, MDF, fir board, multi-layer solid wood board, (of course, others)
First, particle board (not recommended - there are a lot of panel furniture are this material)
Particleboard (also known as solid wood particle board) is a piece of wood or other wood fiber material that is cut into a certain size as a raw material. After drying, it is mixed with an adhesive, a hardener, a waterproofing agent, and pressed under heat, pressure and a certain temperature. An artificial board.
The advantages of particleboard:
1 The inside is a granular shape with a cross-displacement structure, the performance in each direction is basically the same, and the lateral load-bearing capacity is good.
2 In the production process, the amount of glue used is small, the environmental protection coefficient is relatively high, the surface is flat, the texture is realistic, the weight is uniform, the thickness error is small, the pollution resistance, the aging resistance, the appearance are beautiful, and various veneers can be performed.
3 The finished product does not need to be dried again, it can be used directly, and the sound absorption and sound insulation performance is also very good.
Disadvantages of particleboard:
1 The inside is a granular structure and is not easy to shape.
2 The edge is rough, easy to absorb moisture, and it is easy to cause the phenomenon of tooth on the board. Therefore, some processes have higher requirements on the processing equipment and are not suitable for on-site production.
Second, the MDF (multi-easy shape for tooling)
MDF (also known as fiberboard) is a hot-grinding (grinding powder) sizing (urea resin or other suitable adhesive) with wood materials such as trunk materials, twigs and other plant fibers, and drying, and hot pressing after paving. And made of an artificial board.
The advantages of MDF:
1All kinds of veneer, adhesive film, veneer, light metal sheet and other materials can be glued on the surface of the MDF. Various paints and paints can also be applied on the MDF, and the effect is very beautiful.
2 Hard MDF board can be punched, drilled, and can also be made into sound absorbing board, the surface is smooth and flat, the material is fine, the performance is stable, the edge is firm, easy to shape, avoiding the problems of decay, insects, etc.
3 Physical properties are excellent, the nail holding power is good, the material is uniform, and there is no dehydration problem.
Disadvantages of MDF:
Not dampproof, swell when seeing water, large deformation under load for a long time
Third, the fir board (pushing index 3 hearts)
The fir board is a large-area thick plate (shovel board, large core board; single-core paint-free solid wood board) which is made of short and small materials by means of finger joints. It is generally made of high quality wood (more is pine. Therefore, commonly known as fir board) as a substrate. After high temperature degreasing and drying. Finger joints. Panels. Sanding and other processes.
The advantages of the fir board:
1 After high-temperature degreasing treatment, it is made into a warp knot; it is durable, non-worming, non-deformable, and also emits a faint scent of wood.
2 is the original natural plate, the wood grain is clear, natural and generous, the natural simplicity of returning to nature, the rubber content is only seven tenths of the wood board, and the environmental protection is strong.
3The surface is sanded and thickened. It is smooth and smooth. When the wardrobe is made, the surface does not need to be attached to the panel. It saves labor and materials. It is economical.
Disadvantages of fir boards:
Poor quality fir boards, water content is not up to standard, easy to deform, cracking after a long time
Fourth, multi-layer solid wood board (pushing index 3 hearts)
The multi-layer solid wood board is made of three or more layers of veneer or thin board glue. The splint is generally divided into 3 PCT. 5 PCT. 9 PCT. 12 PCT. 15 PCT and 18 PCT Six specifications of the board. (Pushing index 5 hearts)
Advantages of multi-layer solid wood panels:
1 small deformation, high strength, good internal quality (small hole, no delamination, good flatness after sawing
2Structural stability, not easy to deform, can adjust indoor temperature and humidity well, surface solid wood skin material has natural and real wood texture and feel
Five, paint-free solid wood board
Here, in particular, the paint-free solid wood board (melamine surface coating); the inner core has (multi-layer solid wood, and single-core fir), which is now widely used in home decoration, especially the cabinet made in the field.
Advantages: Paint-free decorative materials have natural texture, clear wood grain, can be compared with logs, the world's popular wood species, and the surface of the product has no color difference, self-extinguishing from the fire, washable, wear-resistant, moisture-proof, anti-corrosion, anti-corrosion Acid, alkali-proof, non-sticky dust, no mold and blackening due to the wetness of the wall. The product design is well-made, the shape and color are reasonable, the construction is convenient, the saw is cut, the crack is never broken, the trimming is used and the paint is free. The line is matched with glue, no need to worry about the ash after nailing, and no need to paint, can save the labor and paint cost of the paint after construction, avoid the paint producing unhealthy smell and carcinogenic substances to the human body, not only saving a long-term maintenance The cost of nursing, and shortening the construction time, the effect is both elegant and the cost is reduced. Therefore, it is a new generation of paint-free decorative materials that are green, environmentally friendly, non-toxic, tasteless and pollution-free. The products lead the new trend of decorative materials with high-grade benefits. .
Hebei H-pack Machinery Manufacturing Co., Ltd (subsidiary of Helper Group) is one of earliest manufactures who engaged in polyurethane, silicone adhesive, emulsion explosive, printing ink packing machinery. Thanks to the exquisite technology, serious working attitude, perfect after service, all of these make the reputation of Helper spread in polyurethane and silicone adhesive industrial field. Our polyurethane packing machine, aluminum wire double clipping machine and great wall clipping machine help our clients to create value as a result of their reliable performance.
Clipping Machine,Sealant Filling Machine,Hot Sealing Machine,Automatic Sealant Packing Machine
Helper Machinery Group Co., Ltd. , https://www.helperfoodmachiney.com