Veneer veneer: It uses the thin wood skin to treat the surface, giving the appearance of the same as the solid wood furniture. The color is natural, the natural color of the wood product is maintained, the texture is clear, and the service life is long. The artificial substrate is not deformed, cracked, and the cost is low. Common veneer veneers: cherry wood veneer, walnut veneer, eucalyptus veneer. Maple veneer, wood veneer, etc.
Wood grain paper cut surface: It is made by modern laser typesetting technology and imitation wood grain road. The process is simple, high temperature resistant, not easy to wear, and the cost is lower than wood veneer.
Advantages of veneer office furniture:
The cost advantage is much better than that of solid wood furniture. The appearance has the natural intimacy of solid wood office furniture, and it will not be deformed, and the production cycle is relatively short.
Production process of veneer office furniture:
1. White blank inspection: remove the oil stain and offset on the white blank to avoid uneven coloration when the bottom is colored.
2. Filling the nails: Use putty to fill the nail holes, seams and defects of the board, and minimize the impact of the defects of the board on the product quality.
3. Grinding: Grind with 240# sandpaper machine, grind the corners by hand, and smooth it.
4. The bottom of the treasure is closed: closed with the first primer of the exhibition, spraying, brushing, the purpose is to prevent sag and easy to evenly color; but the corners should be closed thicker to avoid the appearance of the bottom coloring The phenomenon of uneven coloration.
5. Sanding: Polish with 320# sandpaper to remove burrs.
6. Bottom coloring: use the exhibition PU Gracie to make the bottom color, the color should be evenly wiped.
7. The bottom of the Debao is closed: it is closed with the primer of the exhibition and sprayed evenly. The purpose is to protect the background color to avoid floating color after spraying the primer; it can also increase the adhesion of the primer. Prevent sagging.
8. Grinding: Grind with 320# sandpaper, smooth and smooth, and the corners can be worn with 400# sandpaper or elastic sandpaper.
9. Complementary color: Self-adjusting and repairing color water, used to repair the worn-out part and the light-colored part, so that the color of the whole background color is the same, there will be no color difference or hair color. A uniform color furniture can greatly improve the quality of the entire product.
10. Zhanchen PE primer: Spreading PE primer, exhibiting according to the standard ratio and spraying evenly.
11. Grinding: Grind with 240# sandpaper machine, then grind with 400# sandpaper, smooth and smooth, no sand marks and bright spots.
12. Face repair: use color gold oil and color fine according to the color palette of the sample, refer to the color plate to repair the color.
13. Light grinding: lightly remove particles and impurities with 600# sandpaper.
14. Exhibition Chen Topcoat: Zhanchen anti-scratch series of topcoats, adjusted to 12 seconds according to the standard ratio.
The price of solid wood veneer office furniture should be 70% cheaper than that of solid wood office furniture. In the production cycle, it should be shortened by 4 working periods, and the pattern of logs should be preserved on the surface of furniture. The manufacturer technology of solid wood veneer in Guangdong office furniture has been Very mature. Therefore, we do not have any quality problems when we purchase the general manufacturers.
Club Stool,Commercial Bar Stool,Club Leisure Stool,Restaurant Bar Stool
Foshan Livemate Appliance Co., Ltd. , https://www.livemate-furniture.com