[ Chinese wardrobe net ] The overall wardrobe is so beautiful, but as a custom-made furniture, the doorway inside, as a consumer, does not need to be proficient, but also has to understand one or two. The biggest problem with the overall wardrobe is that it is environmentally friendly and cost-effective to use the board, how to look at the quality, and to understand the common wardrobe to the ceiling design.
Common overall wardrobe material
1, particle board
Intermediate long wood fiber + fine wood fiber on both sides, pressed into a board. Particleboard: Take the plantation, the trunk of the natural forest, the shaving of the branches or the shavings, formed by high temperature and high pressure. The advantage is that the expansion rate is small and the stability is strong. Suitable for relatively humid environments such as kitchens. The disadvantage is that it cannot be surface-milled.
2, MDF
The wood is broken, the original fiber is pressed by high temperature, the surface is flat, the milling is easy, the stability is good, and the nail holding power is strong (because the MDF is a solid material, all nail holding power is greater than the particle board). Etc. It is better than particleboard in strength and hardness. But there are also shortcomings that are not resistant to blisters. The amount of expansion after being blistered is approximately 2 mm on one side. Therefore, the MDF is more suitable for a drier environment such as a wardrobe.
3, plywood
Plywood, commonly known as multi-layer board, is a sheet-like material formed by gluing a veneer or a sheet of veneer formed by spin-cutting of wood under a certain time. Commonly there are three plywood, five plywood, nine plywood and twelve plywood (commonly known as plywood, plywood, nine plywood, twelve plywood). Plywood has common defects such as low-gloss strength and partial opening, plywood warpage, and more is used to make oil-filled panels or back sheets.
4, fire board
The fireproof board is made of a siliceous material or a calcium material as a main raw material, and is mixed with a certain proportion of the fibrous material, the lightweight aggregate, the binder and the chemical additive, and the decorative sheet is made by the autoclaving technique. It is a new type of material that is increasingly used today and is used not only for fire protection. The construction of fireproof board has higher requirements for sticking glue, and the price of fireproof board with better quality is more expensive than decorative panel. The thickness of the fireproof board is generally 0.8 mm, 1 mm and 1.2 mm.
5, solid wood board
The solid wood board is made of complete wood. The material is taken from natural solid wood. There are any pollution and safety concerns, but we know that the furniture of solid wood material is more expensive. In the panel wardrobe, the wardrobe product of solid wood board is also the same. Also expensive, the production and construction process above the requirements are high, the production costs are correspondingly increased, so which kind of board is best? If you do not require brand wardrobe products, custom solid wood wardrobe in the surrounding areas of the city is More reasonable choices.
6, tooth plate
The toothed plate is a kind of splicing material which is made up of a plurality of longitudinal and horizontal strips adhered and cold pressed with an adhesive, which is what we call an integrated target, which has a more adhesive process. Do not use urea-formaldehyde glue, but use white latex, so environmental protection can make everyone feel at ease, when choosing the tooth plate, we should pay attention to purchase from regular manufacturers.
Stainless Steel Water Bucket,Stainless Steel Water Pail,Stainless Water Bucket,Flat Sided Water Bucket
Jiangmen Junerte Stainless Steel Kitchenware Co.,Ltd , https://www.jmjetkitchenware.com