The use of cross-section squeegee and ordinary tip squeegee

The cross-section type squeegee 1 and the cross-section squeegee have a service life that is seven times that of the ordinary squeegee.
2. Since the contact area between the cross-section squeegee and the plate cylinder is always kept constant, it is also possible to ensure that the squeegee pressure is constant and consistent.
3. Even if the squeegee wears out, it will not have any effect on the printing tone.
4. The pressure of the squeegee can be kept at a minimum, therefore, the wear of the squeegee is reduced, and the service life of the platen is extended.

Ordinary pointed squeegee 1. Replacement squeegee blade will inevitably increase the downtime of the equipment. Moreover, after the blade is replaced, it will be restarted and printed. This will also result in waste of materials, every time.
2. Re-adjusting the tone value also takes a certain amount of time.
3. When replacing a job, you also need to replace the doctor blade.
4. Whether it is an old squeegee blade or a new blade, it must be re-polished before it is put on the machine.