Ignore ten behaviors, causing print cartridge life to suddenly become shorter

[Office Partner Information Center] The ink cartridge is an important part of the inkjet printer that stores the ink of the printer and finally completes the printing work. The mainstream ink cartridges on the market today can be divided into split type ink cartridges and integrated ink cartridges. Although with the development of technology, the price of ink cartridges has a downward trend, there are many compatible products and low-cost ink cartridges appear on the market, but the prices of mainstream ink cartridges produced by several major manufacturers are still hundreds of dollars, especially for certain models of printers. In fact, even the price of two boxes of ink cartridges is equivalent to the price of a printer.

It can be said that the problem of the ink cartridge has always been a big stone in the user's mind. Therefore, how to extend the life of the ink cartridge has become a problem that users are very concerned about. Here, I will introduce you to twelve possible behaviors that may shorten the life of the ink cartridge. .
122

Wrong way 1: Place the cartridge under sunlight or a strong light source

As we all know, even if it is not opened, the ink is stored in the ink cartridge. Under strong light, it is likely to cause certain chemical changes in the ink, which will affect the printing effect in the future. The ink cartridge is preferably stored in a cool place, and the storage temperature before opening. It should be between 0 and 35 degrees Celsius. Below zero, the ink may freeze. If the storage temperature is higher than thirty-five degrees, after a long time, it is likely to cause a change in the ink composition in the ink cartridge, which adversely affects the life of the ink cartridge or the printing in the future. Pay attention to the light when storing the ink cartridges, and pay attention to the temperature.

Wrong way 2: Place the ink cartridge in a dusty place

Some users do not pay attention to the placement of the ink cartridges. Therefore, the ink cartridges are placed in a place with a lot of dust. The ink cartridges are considered to be closed, so the effect should be small, but the dust on the surface of the ink cartridges may be in the process of installing the ink cartridges in the printer. , mixed into the ink, affecting the quality of the print, but also affect the life of the ink cartridge. Where the dust is too much, it is easy to affect the life of the ink cartridge.

Wrong way three: put the unopened ink cartridge upside down

This is a taboo for cartridge storage. Some users don't pay much attention when placing the cartridge, put the cartridge upside down, and when it is needed, it is too late to find it. Therefore, even if the placement of the ink cartridge is also very particular, it should be the best and safest way to place it in the direction indicated. Follow the instructions to place the cartridge in the correct orientation to help extend its life.

Wrong way four: drop the cartridge

Whether it is sealed or opened, you should not drop the cartridge. Dropping the ink cartridge can easily cause damage to the components inside the ink cartridge, and it is likely to cause the ink cartridge to leak ink. This is a fatal injury to the ink cartridge, so the user is advised to take it lightly during the handling of the ink cartridge. Be careful not to drop the ink cartridge when handling it.

Wrong practice 5: Before the ink cartridge is installed and used, the outer packaging and the air hole seal of the ink cartridge are uncovered.

During the use of the user, the air hole seal should be removed according to the printer's instructions, but do not remove the other seals, otherwise the ink in the ink cartridge will leak easily. After the ink cartridge is unpacked, it should be installed in time to better protect the ink in the ink cartridge. After the ink cartridge is unpacked, it is no longer in a closed state, and the ink will be exposed to the air, so if it is not installed in time, it may cause the ink cartridge to fail to come out.

In order to better protect the ink cartridge and extend its life, the user should install it after the ink cartridge is unpacked. It is important to note that every time you install a new ink cartridge, you must clean the printhead. This is to protect the ink cartridge. Nowadays, the ink cartridge is expensive, so it is necessary to protect the ink cartridge in all aspects. Do not open the outer packaging and the air hole seal before using the ink cartridge.

Wrong Practice 6: Open the cartridge protector

The cartridge protector can better protect the cartridge. Users should pay special attention to the printer's use, or when replacing the cartridge, do not open the cartridge's protective clip, which will prevent the cartridge from continuing to use. Therefore, the user should pay special attention to the cartridge protection clip when using it. Do not open the cartridge protector easily.

Wrong Practice 7: When the printer is working, reach into the printer or touch the cartridge

After the ink cartridge is installed, some users may have doubts about the quality of the ink cartridge, and the handle directly protrudes into the printer to touch the ink cartridge to check if there is any problem. But such behavior is very dangerous, because if it is not a professional, it is likely to damage the ink cartridge or damage the printer during this process. Therefore, if you have doubts about the quality of the ink cartridge, you should take it out of the printer, seal the unused ink cartridge with scotch tape, seal it with a plastic bag, and send it back to the dealer. Please do not work when the printer is working.

Mistake No. 8: Too many times cleaning the printer

Some users will think that the more frequently the print head is cleaned, the better it is for the ink cartridge, but the idea is wrong. In fact, the print head cleaning is the rotation of the gear in the water pump to squeeze the air, and the ink in the ink cartridge is pumped down, so a certain amount of ink is used for each cleaning. Therefore, unnecessary cleaning will result in waste of ink, and for the ink cartridge, it will shorten its service life.

Therefore, the user has noticed that the print head should not be cleaned too often, and the print head is only cleaned when the quality of the print is degraded. Moreover, it is necessary to point out that if the printer is not used very often, and the chip is powered off, the battery is used to store the cleaning information. Therefore, after a long time, the cleaning information will be lost. If the printer is turned on after a few days, it will execute. The cleaning process of the print head will easily cause unnecessary ink consumption. Do not clean the print head frequently.

Wrong practice nine: the machine is often idle, but does not seal the nozzle

Some users have purchased a black-jet printer, but they are not used often. The printer is often idle. In this case, if the nozzle of the ink cartridge is not sealed, it will easily cause the ink on the nozzle to dry out and cause blockage. Users can buy cartridge closures on the market, and of course many users start making closures. The user must follow the guided process during the production process. Do not damage the ink cartridge during the process of sealing the nozzle. Seal the nozzle when the printer is idle.

Mistakes 10: tend to print pictures of a certain color

If the user is more focused on the picture of a certain color during the printing process, the print head controls the ink droplets of the color to be exhausted prematurely. At this time, even if there are still many other colors of ink, the entire ink cartridge can no longer be used. It seems that this cartridge is running out without printing much. In order to avoid this phenomenon, in addition to some necessary circumstances, the user should print some color-balanced pictures in order to make full use of the ink cartridges. It is best to use colors evenly when printing.

Summary of the full text: Now inkjet printers have become a kind of office equipment that can be seen everywhere. I believe that most people have used it. For all users who use printers, the problem of ink cartridges can not be ignored. It can be said that it is one. The heart part of the printer. The good use and maintenance habits can effectively extend the service life of the ink cartridge, thereby achieving the purpose of saving the use cost. The above is some of the daily easy-to-do notices that are compiled and summarized. Only by knowing how to use materials can you make your printer work better for you.

Bamboo Bottle

Bamboo Bottle,Bamboo Sports Bottle,Bamboo Andle Lid Vacuum Bottle,Bamboo Vacuum Bottle

Ningbo Auland International Co.,Ltd. , https://www.everdrinkingbottle.com

Posted on