There are many problems in summer decoration, but sometimes it is inevitable to work in summer. In order to avoid some problems, it is necessary to do preparatory work before the decoration, so that problems can occur even if they respond. The following small series will introduce you to some problems in summer decoration and countermeasures.
First, the wall problem
Question 1: "Sweating" moldy
It is wet in summer and often encounters latex paint because it is slow to dry and moldy. If the putty is not dry, repeat the putty or brush paint, and lock too much moisture in it, the wall will appear "sweating" phenomenon, and even a large area cracking.
Suggestion: Dry the base layer putty during the construction in summer, and paint the wall after three to four times of putty. After each time you put on the putty, the drying time should be extended as much as possible, and ventilation should be done to reduce the indoor moisture as much as possible. Moreover, it is best to brush the interface agent before the putty to prevent the alkaline substance from seeping into the latex paint.
Question 2: Paint film wrinkles
Applying paint on a hot day can easily cause the surface of the film to dry faster than the bottom layer. The uncured coating film is exposed to an excessively humid environment. If the coating is continued on the contaminated surface, if there is dust or oil, the surface of the film may be rough and wrinkled.
Recommendation: The remedy is to scrape or polish the surface of the substrate, remove the wrinkled coating, and repaint.
Question 3: Wall yellowing
Sun exposure can easily cause yellowing discoloration in ordinary paint walls due to UV aging and oxidation of other substances.
Recommendation: For areas with strong sunlight or pollution, it is recommended to use high-quality latex paint with anti-aging and light resistance.
Second, the problem of wood products
Problem 1: Expansion deformation
In summer, the temperature is high and the humidity changes greatly. The exposure of the sun will accelerate the aging of the paint and glue of the wood products. If it is too moist or encounters rain, it will also cause the wood products to swell and even mold.
Suggestion: On-site production of the required plates for furniture, storage should be taken to prevent exposure to strong sunlight, it is best not to put the plates and wood in a room with direct sunlight. In case of heavy humidity in rainy days, measures such as moisture and deformation should be taken during storage.
Question 2: Paint fogging
In the wet season, the paint construction is difficult, the paint is dried slowly after the paint is applied, and the paint absorbs the moisture in the air, and a matte surface is generated.
Recommendation: For wood products, whether it is brush varnish or mixed oil, remember not to brush in the rain. In the rainy days, please ask the construction team to do some other work first, or even temporarily stop working for two days, so as not to cause problems in the paint.
Third, the tile problem
If the water is insufficient in water absorption, it will appear empty and fall off when it is bonded to the cement. This situation is more likely to occur in the hot and dry summer. Therefore, whether it is tiling or leveling on the ground, not only should you use enough water, but also lock in moisture to ensure that moisture is not lost.
Recommendation: Before tiling, do not let the bottom layer of the veneer be too dry. Splash water first and absorb it for about half an hour to ensure a firmer bond. Since the material is drier than usual, it is necessary to extend the time the tile is soaked so that it is sufficiently close to saturation. After the tiles are finished, it is best to cover the cardboard with a layer of water and pour it through the water, then open the window and ventilate it to dry naturally. If the temperature is high and it does not rain for a long time, it is necessary to spray water regularly on the wall of the tile, let it dry slowly and stick more firmly.
Fourth, the floor problem
Problem 1: Water immersion deformation
In the summer, thunderstorms often come suddenly. In this humid weather, the wooden floor is very easy to expand and deform. How to prevent moisture on wooden floors?
Recommendation: First, do more waxing care. Wax is applied once every six months or a year, so that the wooden floor can be protected from the rainy season. It can also be coated with a moisture-proof film on the surface of the wooden floor to protect it from moisture. If you notice a mildew on the surface of the wooden floor, wipe it with a softening bleach of 1:3 and dry with a rag.
Question 2: Thermal expansion and contraction
Pay special attention to the size of the seam when paving the floor. If the floor gap is too large or too small, it will affect the paving effect. If the floor gap is too small, the wooden floor will expand and contract, and it will be deformed.
Recommendation: When laying the floor, you must master the size and leave the appropriate room for expansion. Especially in the high temperature season in summer, the gap should be arranged more closely than in the past to avoid the gap becoming larger and affecting the appearance when the temperature is lowered. The seam between the floor and the wall can be formed by the floor bead to solve the disadvantage of excessive wall and floor gap.
Five, furniture problems
Problem 1: Epidermal corrosion
Iron furniture is very sensitive in the summer, and wet or direct sunlight can cause oxidative deterioration of wrought iron furniture or surface paint fading and cracking. Therefore, it is necessary to avoid the impact of the external force, so as not to lift the paint layer and peel off the chrome layer.
Recommendation: For rust prevention, regularly wipe the surface with a small amount of anti-rust oil or sewing machine oil on the cotton cloth to keep the wrought iron furniture bright and new. If you have started to have rust spots, apply oil to the rust and repair the lacquer in time. Be careful not to sand the sandpaper.
Question 2: "heatstroke" expansion
Furniture under high temperature and direct sunlight will inevitably "heatstroke". Especially for solid wood furniture, drawers and sliding doors may be difficult to open and close due to excessive expansion.
Recommendation: In summer, the furniture should be placed away from heat and air conditioning to avoid premature aging of the furniture caused by the huge temperature difference. At the same time, the furniture should be placed away from direct sunlight and covered with curtains if necessary.
Conclusion: There will be some problems in the summer decoration. As long as you are prepared, any questions can be solved. I hope the above tips can help you.
A new generation of decoration and cover design.more beautiful shape instaation mode adopts fastener and screw structure.up and down.
lifting lever instant lifting.proper damping settings.comfortable lift and fall feeling.
Integrated design of the skeleton and welding structure to increase the adjustable angle range.180 degree lay down.
Racing chair is a hotsale design from our company,we have our own mold of whole chair,base on this advantage.we developped the chair configuration,as we know, NYLON frame will more durable than PPthe chair whole frame is made with Nylon,also,we made more wide seat cushions size than market to suitbale for more people.all the components are passed SGS test.
Our factory covers an area of more than 30,000 square meters; Have more than 200 technical employees; At present, we have 10 modern production lines; Our production capacity can be 200 containers per month; Our yearly turnover of 2020 is more than US$20,000,000.00.
We are conducting strict tests for quality to ensure the consistently high standards of our products. Our products are manufactured according to I S O 9 0 0 1: 1 4 0 0 1. Many of our products match EN1335/EN12520/BIFMA standard. Material pass EN1021, REACH, 7P, SHVC, CA65 test and so on.
Racing Chair,Respawn Gaming Chair,S Racer Gaming Chair,Gt Racing Chair
Anji Judor Furniture Co., Ltd. , https://www.cnjudor.com