The toilet is inseparable from us every day. When we choose the toilet, everyone pays attention to its practicality. When we choose the toilet, we will consider its structure, but because we don't know it, we don't know how to choose it. So everyone knows what the toilet structure is? Today Xiaobian will come with everyone to see what the toilet structure is and how to buy the toilet!
What is the toilet structure?
1. The toilet is composed of the following main parts: inlet pipe, outlet pipe, seepage pipe, water plug (inlet and outlet), float ball, drain knob and lever. Be sure to understand the role of the above components in the work.
2. When releasing water, pull the water release knob, and the knob will pull the water plug through the lever. The water in the tank will be released. After the water is released, the water plug falls and blocks the water outlet. At this point, the float is also lowered by the water surface and is at the bottom of the tank. The falling of the float ball causes the lever to pull the water inlet plug and allow the water to enter the water tank.
3. As the water surface rises, the float will gradually rise due to buoyancy until the water plug is pressed by the lever to block the water inlet. This way the water tank is filled with water.
4. When the inlet pipe leaks due to a fault (for example, the inlet plug cannot block the inlet or the inlet pipe is broken), the water surface in the tank will rise continuously and eventually overflow the tank. The setting of the seepage pipe solves this problem. When the water level rises to the seepage pipe, water will flow from the seepage pipe into the toilet and will not allow water to flow through the tank. When the inlet pipe is working normally, the water surface in the water tank will not reach the water seepage port, so there is no need to worry that the water will flow away.
5. When you pull the handle on the water tank to flush the toilet, the starter rod in the water tank will be lifted. This bar will pull the steel rope upwards, and then let the steel rope pull up the ball or rubber cover at the bottom of the water tank. If the opening of the flush valve is smooth, the water in the water tank will flow through the raised ball plug and rush to the lower bucket. In the tank. The water level of the tank will be higher than the water level in the elbow.
6. When the water emerges from the water tank, the floating ball floating on the water surface of the water tank will descend, pulling the floating arm downward, thereby raising the valve plunger of the floating ball valve device, so that the water flows into the water tank again. The water always flows low, so the water in the tank pushes the water in the tank, which flows into the drain, creating a siphon effect that takes everything in the tank. After all the water in the tank has flowed away, the air is sucked into the bend and the siphoning stops. At the same time, the water tank ball will fall
Return to the original position and close the opening of the flush valve.
7. The float will rise as the water level in the tank rises until the height of the float is sufficient to press the valve plunger into the float valve and close the incoming water flow. If the water cannot be turned off, the excess water will flow down the overflow pipe into the tank to prevent the water in the tank from overflowing.
Toilet purchase method
1. Observe the gloss of the toilet, usually the product with higher gloss. The higher the compactness, the easier it is to clean and sanitize, and the higher the gloss, the more beautiful the surface of the product. Therefore, when buying the toilet, it must be seen whether the surface of the product is Shiny.
2, to see if the glaze is even, consumers can ask the merchant whether the sewage outlet is glazed, or even reach into the sewage outlet, touch the back of the water bay whether there is glazed surface, qualified glaze must be delicate. In addition, you can also touch the glazed corner (yin angle and positive angle). If the glaze is made thin, it will be uneven at the corner, and the bottom will appear, which will be rough.
3, the weight of the toilet is a glimpse, and finally the weight of the toilet can be smashed. The high-grade toilet has reached the level of full porcelain because of the high temperature during firing, so it will feel heavy in the hand. . However, when purchasing, it is impossible for everyone to lift the toilet to judge the weight. At this time, we can pick up the water tank cover with both hands and measure its weight to determine the weight of the entire toilet.
What we need to know when choosing a toilet is the toilet structure. Only in this way can we better choose the toilet that is suitable for our home. The above is what Xiaobian today introduces for everyone, and the way to buy the toilet is here. To learn more, please continue to pay attention to the decoration home.
More related wonderful reading:
Toilet structure analysis, toilet brand introduction
Wig Extension Tools,Special Tools For Wigs,Wig Styling Tools,Wig Makers Tools
Xuchang Le Yi De Import And Export Trade Co., Ltd. , https://www.lileaderbeauty.com