The biochemical incubator has a two-way temperature regulation system of refrigeration and heating, and the temperature can be controlled. It is an indispensable laboratory equipment for scientific research in plants, biology, microbes, genetics, viruses, medicine, environmental protection and other scientific research departments. Widely used in low temperature and constant temperature test, cultivation test, environmental test, etc.
1. Its main features:
1. The heat insulation material of the box body is made of polyurethane foam foamed on site, which has strong resistance to external heat (cold) sources.
2. The inner cavity is made by engineering plastic molding process, which has strong corrosion resistance.
3. The all-glass door is convenient for observing the working cavity.
4. In order to protect the refrigeration compressor, the control circuit is designed with power-off protection and 4-minute delay function.
5. Automatic temperature control, using red LFD display to display numbers intuitively and clearly.
2. Instructions for use:
The incubator is placed in a clean, dry and ventilated work room; before use, each control switch on the panel should be in a non-working state; place the test sample on the incubator, and keep between the test bottles (or utensils) when placing Appropriate distance to facilitate convection circulation of hot (cold) air; turn on the external power supply, put the power switch to the "on" position, the indicator light is on; select the cultivation temperature;
1. Adjust the temperature to the thermometer you want, and digitally display the required design temperature. Please set the temperature strictly according to the temperature controller manual.
2. The digital display shows the actual temperature in the working chamber. If the ambient temperature is lower than the set temperature heating. The incubator will automatically heat up. If the ambient temperature is higher than the set temperature, the incubator will automatically cool down.
3. Observe the lighting switch in the working cavity. After the work is completed, set each control switch to a non-working state and cut off the power supply.
3. Matters needing attention:
1. In order to prevent pollution, the use of low temperature should try to avoid condensation on the wall of the working chamber.
2. It is not suitable for the cultivation of articles containing volatile chemical solvents with low concentration of explosive gas and low ignition point gas and toxic substances.
3. Proper use and maintenance of the incubator (such as appropriate ambient temperature and working temperature; effective cooling of exposed refrigeration compressors and wire tube condensers) keeps it in good working condition and can extend the service life.
4. When the refrigeration system is working, in addition to the needs of the test, frequent opening of the box door should be avoided, which is beneficial to maintain stable temperature and prevent dust and dirt from entering.
5. After the refrigeration system stops working, the company will continue to provide high-quality services and assist in handling if there is a malfunction or difficulty.
Best Led Strip Lights Under Cabinet,Powerful Outdoor Led Flood Light,Outdoor Lighting For Your Home
Jilin Province Yuaoda Trading Co., Ltd , https://www.yuaodacn.com