Salt spray test chamber As a salt spray corrosion of electronic components, components and metal materials, the test procedure of this ring test instrument is quite strict, which can ensure the accuracy of the test results and reduce the error of the test results. .
First, connect the power cord first, and the air compressor needs to be connected. Then open the test machine and pour pure water or distilled water into the bottom water tank until the low water level of the panel is extinguished, otherwise it will not be able to operate.
Second, the drain pipe and the exhaust pipe in the test machine need to be connected, and then the water is added to the pad to prevent the salt spray from leaking.
Third, when everything is ready, turn on the power, first set the temperature of the salt spray test chamber and the temperature of the saturated barrel. This setting method only needs to dial the two numerical control instruments on the control panel to the setting file.
Fourth, the control value of the over-temperature protector on the right side of the salt spray test box is generally set at about 55 degrees Celsius to prevent the instrument from malfunctioning and burning the box. When the temperature of the working chamber is too high, the over-temperature protector will cut off the power supply, and the user should not arbitrarily adjust the protector.
5. Pour the prepared salt water into the brine tank. The end of the gauze should be placed in the wet ball cup.
Sixth, the sample is placed on the sample holder, and the angle required by the experiment is set. The test parameters are set by the meter, and then the power and the operation keys are pressed, and the test can be performed.
Instrument Cart,Hospital Instrument Cart,Surgical Instrument Cart,Stainless Steel Instrument Cart
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalsupplier.com