Shanghai Nuoguang high-speed than right-angle ABR40 precision planetary reducer

Nuoguang precision planetary gear reducer performance and features:
1. The planetary gear transmission interface uses full needle needle bearings without retainers to increase contact area to increase structural rigidity and output torque
2, using 3D / PORE design analysis technology, respectively, the spiral tooth surface for tooth shape and lead trimming, in order to reduce the gear to the in and out of the impact and noise, increase the life of the gear system;
3, gear material selection of advanced chromium molybdenum vanadium alloy steel, after quenching and heat treatment to the substrate hardness 30HRC, and then use our advanced ion nitriding equipment to nitride the hardness of the gear surface to 840HV, in order to obtain the best wear-resistant Consumption and impact toughness;
4. The integrated structure design of the planetary boom and the output shaft adopts a large span design to ensure the maximum torsional rigidity and output load capacity of the output shaft;
5. The oil seal contact surface at the output end adopts advanced titanium nitride (TiN) coating. The surface hardness is more than 2000HV, and the surface roughness of the contact surface is less than Ra 0.2um, which can ensure the lowest friction coefficient and the lowest starting torque;
6. Use NYOGEL792D Synthetic Lubricating Grease, and adopt IP65 protection level seal design, the lubricant will not leak and maintenance-free;