[ Chinese wardrobe net ] plastic wardrobe is a very good type of wardrobe, many consumers buy a wardrobe, plastic wardrobe is a very convenient choice, and after purchasing a plastic wardrobe, the correct assembly decided The use of plastic wardrobes, so Xiaobian today to introduce you to some of the assembly methods of plastic wardrobe for your reference.
Plastic Wardrobe Assembly - Plastic Wardrobe Assembly Tool Selection
Plastic wardrobes, track boxes and plastic facades that are generally purchased on the market have been produced and formed. In the process of installing the plastic door of the wardrobe, it is only necessary to fix the plastic door in the track box. The tools we need to use in this process are mainly six-grid wrenches, plum screwdrivers and hardware accessories.
Plastic wardrobe assembly - sliding door wardrobe assembly and installation steps
1. Distinguish and clean the main components and installation position of the plastic door. It is necessary to distinguish the plastic door up and down track box.
2. The general E-shaped track box on the market is above, using screws and other hardware accessories, fixed on the upper end of the wardrobe, and the surface level of the wardrobe.
3. The track box like the flat plate is the lower end, which is fixed about ten millimeters from the cabinet surface, and the moving door is put in. In the final step, just use a six-grip wrench to adjust the height of the hole wheel to level the surface of the wardrobe.
Plastic Wardrobe Assembly - Precautions for the assembly of the sliding door wardrobe
1. Since the sliding door is in contact with the wall or the sides of the cabinet, there is no other object in the contact position to block the closing of the sliding door. For example, the position of the drawer in the cabinet should avoid the intersection of the plastic door, and it should be at least 25px higher than the bottom plate; the drawer in the folding cabinet should be at least 375px from the side wall. Pay special attention to the power switch and socket on the wall. The sliding door should be closed and the position of the switch and socket should be changed.
2. Regardless of the ground on which you make any material, ensure that the level of the door is kept horizontal and vertical. Otherwise, the door will be skewed after the installation is completed. The adjustable error is no more than 10mm. Do not install the corner line in the installation position. The plaster line can be installed on the sealing plate above the wall cabinet. If the door is directly to the top, do not install the plaster line.
The above is a brief introduction to some of the methods and precautions for the assembly of plastic closets. I hope that everyone can use them as a wardrobe in the future. I can refer to them from the small series for your introduction. I believe it can bring very good results. The use effect, let us all get good results in the actual use process.
Professional Gog Diet Fiber Food Care for Stomach
Gog Food,Gog Diet Fiber Food,Gog Food Care For Stomach,Protein Freeze-Dried Pet Food
DongGuan Lucky Pet Products Co., Ltd. , https://www.dgluckypet.com