CP balance calibration
After installing the weighing pan, press and hold the print / calibration key until the screen displays CAL, and then release the key. Then the screen will display the flashing weight value, and put the corresponding weight on the weighing pan. The screen will show the flashing BUSY, and then the screen will show CLEAR PAN, then remove the weight from the weighing pan. Later, DONE is displayed on the screen, and then returns to the weighing state, the calibration is successful.
Unboxing shows ERRO8.4
Check whether the weighing pan is installed and reinstall the weighing pan. If the fault cannot be eliminated, unplug the power supply, remove the weighing pan, lightly press the part where the weighing pan is placed with your fingers, if it feels elastic, if it is not elastic, it means that the internal reed broke during the transportation of the pan, please contact Yihua new technology engineer maintenance.
A dotted line is displayed on the startup screen
Turn on the menu lock at the bottom of the balance and switch it off. Press and hold the unit / menu button and the power button at the same time until Service is displayed on the screen.
Ram will be displayed on the screen. Short press the unit / menu key, when Linear is displayed on the screen, press the power button
PUSH will be displayed on the screen, put a weight equivalent to the full scale of the balance on the weighing pan, then CLEAR PAN will be displayed on the screen, remove the weight, a flashing 0 will be displayed on the screen, and then a weight will be displayed Value, place the corresponding weight on the weighing pan, BSUY will be displayed on the screen, and then a weight value will be displayed, and then add the weight to the weighing pan until the total weight of the weight on the weighing pan is equal to the screen The displayed value. Then BUSY will be displayed on the screen, followed by a weight value, remove the weight. BUSY is displayed on the screen, then CLEAR PAN is displayed, and the weight is removed. BUSY is displayed on the screen, and a weight value will be displayed on the screen later, put the corresponding weight on the weighing pan, then CLEAR PAN is displayed on the screen, the weight is removed, then DONE is displayed on the screen, and then displayed Linear.
Short press the unit / menu key, SPAN is displayed on the screen. Short press the power button, the screen displays a flashing 0, and then displays the weight value, put the corresponding weight on the weighing pan, the screen displays BUSY, later displays CLEAR PAN, remove the weight, and later displays DONE , Followed by SPAN. Press the unit / menu key, the screen displays END, press the power button to return to the weighing state.
Melamine Board,Whiteboard With Stand,Magnetic Whiteboard Sheet
Dongguan Aoxing Audio Visual Equipment CO.,Ltd , https://www.aoxingboard.com