[ Chinese wardrobe net ] sheet is the main component of custom closet , its quality directly determines the quality of the product, the market's closet sheet mainly uses splint, particle board, fiberboard, and the fiber board is made of high density, medium density, What is the good material for the wardrobe? How to choose the material of the custom wardrobe?
Composite solid wood, moisture-proof board, solid wood paint-free board
It is moisture-proof, environmentally friendly, and cost-effective. The national wardrobe products have experienced more than ten years of development, and more than ten years of experience is enough to determine the wardrobe with a moisture-proof board is the best choice! The moisture barrier of the wardrobe can be used in heavy humid environments, showing its high quality. Due to the more fragile surface, the requirements for production equipment are higher. Nowadays, the new wall is decorated and painted, and the wall will have a small amount of water. After the whole wardrobe is installed, it cannot be ventilated, and the back part of the wardrobe needs a plate with better moisture resistance. The moisture-proof board is immersed in water. Because of the long wood fiber and the green moisture-proof agent, the immersion expansion will not expand until it is soaked to a certain extent. Therefore, most of the brand wardrobes use the moisture-proof board as the main material of the cabinet, which is reasonable.
Particleboard and MDF
MDF is also called MDF. It is pressed by wood powder and has better flatness. It is more suitable for boring and milling. It is usually used to make door panels, such as baking varnish and moulding (blistering). There is also a softer material for MDF, which is less prone to blasting when sealing, and easier to process, so many small factories use medium denier. In terms of moisture resistance, the particle board is much less resistant to moisture than the moisture-proof board, and the green core moisture-proofing agent is less. If it is in a humid environment for a long time, the wood is prone to mold and decay.
Low cost production of particle board
Most small manufacturers consider cost, generally using particle board (that is, solid wood particle board), using ordinary glue, and the cost is the lowest among the three materials.
Ecological board
Large core board or sandwich board with double-sided paste tripolymmonia! Quality: Sandwich panels (commonly known as blockboard, wood board) are plywood with solid wood core. It cuts logs into strips, splices into cores, and is made of outer surface materials. The force of the whole board comes from thin. The two-layer outer veneer is spliced ​​with wooden blocks in the middle, and the substrate is basically free from force and is easily broken and deformed. Most of the plates are made from fir for one or two years. As long as the pieces are broken with fingers, the nail holding power is several times lower than the national standard.
At present, the high-end custom-made wardrobe mainly uses melamine pressure-faced medium-density fiberboard, which has the characteristics of moisture resistance, good internal bonding, acid and alkali resistance and good flame resistance, and is very suitable for home decoration.
China lighter production machine, lighter automation equipment, lighter assembly machine, lighter automatic inflator, lighter automatic lighter, lighter parts assembly machine, lighter accessories manufacturer
Lighter automation equipment,Lighter Assembly Machine,Lighter Automatic Inflator,Lighter automatic production line,Lighter Parts Assembly Machine
Hunan Feituo Automation Technology Co., Ltd. , https://www.feetoolighter.com