Handbag printing notes

In the process of printing handbags, it is necessary to pay attention to the use of the same kind of ink. Do not mix different types of inks. If the two cannot be incompatible, it will affect the quality of the handbag.

2

When printing, it is necessary to ensure the nature of the ink, to avoid direct sunlight, but also to maintain the indoor temperature, preferably within 10-26 degrees Celsius.

3

In the process of carrying out the bag printing, if the ink is not frequently stirred, it is easy to cause sticking, which will affect the overall rendering effect of the handbag. However, care should be taken not to dilute it too much. As a result, the printed product will have a color difference, and thickeners can be added as appropriate.

4

In the printing process, we must fully play the role of water, it can effectively control the ink viscosity, but also can play a role in the balance of pH. If it is found that the ph value is not controlled between 8.5-9.5, it should be added water or PH stabilizer to adjust.

5

Bag is a high-speed printing, printing process is very fast, so the ink dryness also has certain requirements, if the ink drying speed is too slow, you can add a desiccant to increase its drying speed, if Printing on the condition that the ink is not dried can easily cause the layout to take off and dirty, which also affects the overall printing efficiency.

6

After the printing is completed, the equipment should be cleaned, and the ink on the equipment is still in a viscous state, so that the speed of cleaning can be improved. If it cannot be cleaned with clean water, some cleaning agents can be added properly.