Use floor mats to reject foam
As a geothermal heating method with water circulation heating, in the process of actual application and installation, in addition to the choice of the floor, the treatment of the ground before installation will also be decisive for the normal use of the geothermal heating system. The role.
Before the installation of the floor, the treatment of the ground should be strictly controlled according to the national standard and then installed. When the floor is geothermally installed, the standards should be strictly enforced to ensure the future use of the geothermal heating system. The normal operation.
Experts said that in the geothermal heating system, the correct installation method is to add a layer of floor mat between the floor and the ground. This floor mat is preferably imported professional paper mat because the imported professional paper mat has Fast heat conduction, no deformation and so on.
When consumers choose mats, whether they are domestic or imported, they can't use foam materials, because the foam mats will generate harmful gases when the geothermal heating system is heated, which will adversely affect consumers' health. .
Considering that any floor has the defect of thermal deformation, when the consumer uses the geothermal heating system in the second year, it must be rigorously circulated according to the prescribed heating procedure, and must not be warmed up in one step, such as heating up to 18 degrees Celsius on the first day. The next day is 25 degrees Celsius, the third day is 36 degrees Celsius.
The reinforced floor is suitable for water pipes not exceeding 45 degrees Celsius and the floor surface temperature should not exceed 30 degrees Celsius. If this temperature is exceeded, it will affect the life and service life of the floor. The average family indoor temperature in the winter reaches about 22 degrees Celsius is already very comfortable.
Related tips
Protect against bacterial infestation in the floor
The floor is an important building material for home decoration. The general public pays attention to the material of the floor when choosing building materials.
However, the public often overlooks the antibacterial properties of the floor. Since the floor tends to be used for several years or even ten years, it will breed bacteria such as mold.
In order to prevent bacteria in the floor from invading your body, pay attention to maintaining the floor during the use of the wooden floor.
Avoid exposure to the floor near the balcony or window. It is best to pull thick curtains when the sun is strong;
Secondly, avoid moisture. Do not wipe directly with a wet mop. When water or other liquid food is sprinkled on the floor, dry it in time to prevent excessive moisture from penetrating into the inner layer of the wooden floor, causing mold and rot.
It should be cleaned with a special cleaning agent for wooden floors to prevent the floor from cracking.
Cleaning is an important step to ensure the health of the living environment. When the floor has been cracked, it should be cleaned to prevent the accumulation of dirt.
When cleaning the floor, focus on vacuuming the dust and debris from the cracked area.
If the accumulated dirt cannot be sucked out, or where it is difficult to clean the corners, you can use a small brush to clean the floor cleaning agent, or you can directly pour the floor cleaning agent onto the rag.
The traditional installation method of wooden floor adopts the keel method. There is an overhead layer between the floor and the floor. The water in the keel and the liquid such as beverages and milk that are infiltrated when it is not volatile can easily breed bacteria and insects.
The new adhesive installation method and metal keel installation method can avoid the disadvantages of the wooden keel installation method.
The viscose method uses an environmentally friendly floor glue to directly bond the floor to the concrete floor, which can eliminate the space under the floor that may accumulate dust.
However, it is forbidden to fix the keel with cement to prevent the floor from being deformed by moisture.
Solid wood flooring performance is also different
There are currently two types of solid wood flooring on the market: log flooring and composite wood flooring.
There are many kinds of wood flooring and specifications, and the color tone is highly selective, but the construction is complicated. Anti-corrosion, anti-deformation and durability are not as good as composite wood flooring.
Composite wood flooring has the advantages of simple construction and good physical and chemical properties, but the color tone and pattern are unified, and the decoration reflects the personality is worse.
There are two types of wood flooring: lacquered panels and plain boards.
Lacquered floor construction is simple, but the finished floor does not have complete paint film protection, which will inevitably affect the service life of the floor and daily cleaning.
The plain board construction is complicated, but the ground is flat after completion, especially the final floor coating, which effectively prevents dust, water and the like from penetrating into the wood layer.
When buying a floor, the grade difference is large. You don't have to buy a high-grade one at the time of purchase, you can buy it at a high or low level.
During construction, the floor, bed, table, and floor under the table can be used at a lower level, which will not affect the overall decoration effect, but also save renovation costs.
Faux Leather Chair,Faux Leather Chair Brown,Office Faux Leather Chair,Faux Leather Upholstered Chair
Taihe Fangyuan Muye Co.,Ltd , https://www.fangyuanfurniture.com